 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz Features * High Gain State: -Gain: 16 dB, Noise Figure: 1.6 dB -Input IP3: +3 dBm (@2.7V, 25 mA) * Low Gain State: -Insertion Loss: 5 dB, Input IP3: +24 dBm * Single Supply: +2.7 to +5 VDC * Low Cost MSOP-8 Plastic Package * Adjustable current: 10 to 30 mA with external resistor Rev. V4 Functional Block Diagram Description M/A-COM's AM55-0016 is a high dynamic range, switchable low noise amplifier in a low cost, MSOP 8-lead, surface mount, plastic package. The design utilizes a patented switching technique to provide a low insertion loss, high input IP3 bypass state in parallel with the high gain, low noise state. The LNA employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The AM55-0016 also features flexible biasing to control the current consumption vs. dynamic range trade-off. It's current can be controlled over a range of 10 mA to 30 mA with an external resistor. Typical applications include receiver front ends in cellular band CDMA handsets. It is also useful as a switched gain block, buffer or driver in portable cellular systems. The AM55-0016 is fabricated using a low-cost 0.5micron gate length GaAs MESFET process. The process features full passivation for increased performance and reliability. Pin Configuration Pin No. 1 2 3 4 5 6 7 8 Pin Name VDD1 IN VS1 GND VS2 OUT VDD2 VCTL Description Stage 1 Supply Voltage RF Input Stage 1 Source RF and DC Ground Stage 2 Source RF Output Stage 2 Supply Voltage Switch Control Voltage Absolute Maximum Ratings 2,3,4 Parameter VDD Input Power Current Channel Temperature 4 Absolute Maximum +6 VDC 0 dBm 30 mA +150C -40C to +85C -65C to +150C Ordering Information 1 Part Number AM55-0016 AM55-0016TR AM55-0016SMB Package MSOP-8 Lead Plastic Package Forward Tape and Reel Sample Test Board 2. 3. 4. Operating Temperature Storage Temperature 1. Reference Application Note M513 for reel size information. Exceeding any one or combination of these limits may cause permanent damage to this device. M/A-COM does not recommend sustained operation near these survivability limits. Typical thermal resistance (jc) = +99C/W. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz Parameter Gain Noise Figure Input IP3 Input VSWR / Output VSWR Reverse Isolation LOW GAIN STATE, Voltage control = 0 volts Rev. V4 Electrical Specifications: TA = 25C, Z0 = 50 , F = 881 MHz, PIN = -30 dBm, VDD = 2.7 V, IDD = 10 mA Test Conditions Units dB dB IDD = 10 mA, VDD = 2.7 V IDD = 25 mA, VDD = 2.7 V dBm dBm -- dB 1DD = 100 A dB dBm -- -- Min. -- -- -- -- -- -- -- -- -- -- Typ. 16 1.6 -2 +3 2.0:1 32 5 +24 2.3:1 2.0:1 -- -- -- -- -- Max. -- 1.8 -- -- HIGH GAIN STATE, Voltage control = 2.7 volts Insertion Loss Input IP3 Input VSWR Output VSWR Evaluation PCB + RF Connector Losses Port Reference RF IN RF OUT Approximate RF Loss 0.15 dB @ 900 MHz 0.15 dB @ 900 MHz Evaluation Board The DC connector on the Designer's Kit PCB allows convenient DC line access. This is accomplished by one or more of the following methods: 1. A mating female multi-pin connector (Newark Electronics Stock # 46F-4658, not included). 2. Wires soldered to the necessary pins (not included). 3. Clip leads (not included). Handling Procedures Please observe the following precautions to avoid damage. Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz Recommended PCB Configuration Cross Section View Rev. V4 The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinues between 50 lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.2 mm) yielding a 50 line width of 0.015" (0.38 mm). The recommended metallization thickness is 1 ounce copper. External Circuitry Parts List 5 Part C1, C2 C3, C4 Value 1000 pF 47 pF 10 nF 22 nH See note 6 UMH9N Purpose Source Bypass By-Pass By-Pass Tuning Source Bias Resistor Dual Bipolar Transistor External Circuitry VDD C4 C5 C3 1 RF IN L1 C1 2 3 4 8 7 6 5 C2 RF OUT C6 C5, C6, C7 L1 RBIAS U1 5. All external circuitry parts are readily available, low cost surface mount components (0.040 inches x 0.020 inches or 0.060 inches x 0.030 inches). 6. RBIAS is chosen to set the desired current, For: IDD ~10 mA, R1 = 75 ohms; IDD ~20 mA, R1 = 25 ohms; IDD ~30 mA, R1 = 9 ohms. RBIAS VCTL U1 C7 Designer's Kit AM55-0016SMB The AM55-0016SMB Designer's Kit allows for immediate evaluation of M/A-COM's AM55-0016. The Designer's Kit includes an AM55-0016, an evaluation board and a floppy disk containing typical performance data and a DXF file of the recommended PCB layout. The evaluation board consists of the recommended external surface mount circuitry, RF connectors and a DC multi-pin connector, all mounted to a multi-layer FR-4 PCB. The AM55-0016SMB evaluation PCB is illustrated below with all functional ports labeled. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz Typical Performance Curves High Gain Mode: Gain vs. Current 19 18 17 16 15 14 13 12 800 10mA 20mA 30mA Rev. V4 High Gain Mode: Noise Figure vs. Current 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 800 10mA 20mA 30mA 850 900 950 1000 Frequency (MHz) 850 900 950 1000 Frequency (MHz) High Gain Mode: Input IP3 vs. Current 7 6 5 4 3 2 1 0 -1 -2 -3 800 850 900 950 1000 10mA 15 mA 20mA 25mA High Gain Mode: IIP3 vs. Current and Voltage 10 8 6 4 2 0 -2 2.7 3.2 3.6 4.0 V V V V Frequency (MHz) 10 12 14 16 18 20 22 24 26 28 30 Current (mA) High Gain: Gain and Output Power vs. Input Power 18 17 16 15 14 13 12 11 10 -26 -24 -22 -20 -18 -16 -14 -12 -10 Output Power (dBm) Gain (dB) 6 4 2 0 -2 -4 -6 -8 -10 Low Gain Mode: Insertion Loss and Input IP3 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 -6.5 -7.0 800 850 900 950 IL (dB) IIP3 (dBm) 30 29 28 27 26 25 24 23 22 21 20 1000 Input Power (dBm) Frequency (MHz) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz Typical Performance Curves (continued) Input Return Loss 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 800 Low Gain High Gain 850 900 950 1000 Rev. V4 Output Return Loss 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 800 850 900 950 1000 Low Gain High Gain Frequency (MHz) Frequency (MHz) High Gain Mode: Gain vs. Temperature 19 18 17 16 15 14 13 12 800 -30C +25C +80C High Gain Mode: Noise Figure vs. Temperature 2.4 2.2 2 1.8 1.6 1.4 1.2 1 800 -30C +25C +80C 850 900 950 1000 850 900 950 1000 Frequency (MHz) Frequency (MHz) Low Gain Mode: Insertion Loss vs. Temperature -4.0 -4.2 -4.4 -4.6 -4.8 -5.0 -5.2 -5.4 -5.6 -5.8 -6.0 800 -30C +25C +80C 850 900 950 1000 Frequency (MHz) 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. AM55-0016 Switched Low Noise Amplifier 800 - 1000 MHz MSOP-8 Rev. V4 Meets JEDEC moisture sensitivity level 1 requirements. 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of AM55-0016
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |